EMC Testing
EMC / EMI Testing Services
DNB Engineering, Inc. is the leading testing and qualification laboratory with proven global success. DNB has the facilities, certifications, and experienced personnel to meet all your testing, qualification, and regulatory compliance needs. Our testing capabilities include, but not limited to:
- Aerospace EMI/EMC
- Military EMI/EMC
- Direct / Indirect Effect Lighting
- HIRF
- Environmental
- Commercial EMC/EMI
- Consumer Products
- Product Safety
- Connectors & Components
- ESD
- Shielding Effectiveness
- RS105 (EMP)
- Power Input
- Radiated Emission
- Radiated Susceptibility
- Conducted Emission
- Conducted Susceptibility
We have built one of the most comprehensive portfolios of service in the industry over the past 40 years. Our goal has been to provide the exact testing service which covers almost every industry.
All of our project managers and testing engineers are professionally trained, certified, and have significant experience to manage all your EMC/EMI testing needs. DNB’s facilities are accredited and certified to perform testing services following the standards for different industries: Military, Aerospace, Commercial (Medical, Radio), and Automotive.
STANDARDS
Baseline Standards and Specifications
Give us a call, if specific regulations are not listed here
– RTCA/DO-160 (C to G)
– MIL-STD-461
– MIL-STD-462
– MIL-STD-464
– MIL-STD-704
– MIL-STD-1399
– MIL-STD-1275
– MIL-G-83528
– MIL-STD-1757
– CISPR 12, 16,22,25
– GB / T 18387 – 2017
– NASA Marshall Spaceflight Center specifications
– Customer-specific requirements
– BOEING
– AIRBUS
– FAA
– EIA – 364
– SAE ARP 5412-16
– SAE AE4L
– SAE AE2
– SAE 1113 / 1355
– Near Strike Lightning
– EUROCAE ED-14 (D to G)
– ED-105
– GSFC-STD-7000A
– SSP 30243
– SSP 30237
– CE Mark
– FCC
– FDA
– UL
– CSA
– C-TICK
– VCCI
– SEMI
– ISO
– TUV
– NEBS / BELLCORE
– DEF-STAN
– EN 12895
– EMC Directive 2014/30/EU
FAQ
General Questions
No matter what service you need, our team is ready and eager to handle your EMC / EMI project.
Please fill out the Request a Quote form on our website, and we will contact you via email. We typically ask for the test requirements (specification, equipment category, a test procedure, etc.), specifications, and the relevant information about the equipment under test (dimensions, weight, modes of operation, number of cables in a bundle, power requirements, and whatever we need to know to have a sufficient understanding of your test needs. You can email your supporting information to zhanna.lamanna@dnbenginc.com. If you have a tight deadline to receive a quote, or if you need an ROM budgetary quote, please let us know so we can tailor it to your needs. We can help your team write a test procedure, or produce a fixture for the dynamic testing, please let us know if you need us to include it in the scope of work.
After your initial submission, we can ask additional questions to ensure that y your requirements match our capabilities. If you need to have NDA on file before you can share the information about your equipment, please see the relevant question below. We will respond via email, and you can proceed by scheduling conference calls, or emailing your questions to our experienced technical managers.
If you need to have NDA on file before you can share the information about your test program, please forward the NDA to Doug Broaddus. Please use Doug’s information below for the purpose of the NDA:
DNB Engineering, Inc.
1750 Raymer Ave.
Fullerton, CA 92833
Phone: (714) 888-0010
Douglas Broaddus
Executive VP
doug.broaddus@dnbenginc.com
Our test facilities in Fullerton and Anaheim, CA can provide you with a comprehensive RTCA/DO-160 or similar MIL- standard scope of testing services. We have the full-service EMC and Environmental lab in Fullerton, CA, and a specialized Direct Effect Lightning facility in Anaheim, CA. Depending on your project scope, we can provide on-site testing. We manufacture custom test equipment, provide test equipment calibration, write test procedures, produce fixtures, consult, and accommodate challenging requirements and timelines.
If you are looking for Commercial, Medical Device, Telecom and similar testing, it can be done at our Test Facility in Coalville, UT. Depending on your project scope, we can provide on-site testing. We manufacture custom test equipment, provide test equipment calibration, write test procedures, produce fixtures, consult, and accommodate challenging requirements and timelines.